costume
cloths from of the natural or with the addition synthetic fibers.
BUT ALSO TO YOU IT IS NECESSARY: glue padding; 4
buttons; backing;
IF ON THE MOLDS
CURVES DUAL OUTLINE, THEN DANA'S MOLDS CURVES WITH THE ALLOWANCE FORS SEAMS, IF
OUTLINE IS SINGLE, THEN DANA'S MOLDS CURVES WITHOUT THE ALLOWANCE FORS SEAMS.
ALLOWANCE FORS THE SEAMS:
all seams 1 cm. the allowance of the bottom of
article and sleeve - 4 cm.
ATTENTION!
FIRST OF ALL, UNSEAL PAPER PATTERNS AND YOU WILL DECOMPOSE THEM ON THE WIDTH OF
THE CLOTH (width of cloth it can be from 90 cm to 150 cm) IN ORDER TO EXPLAIN,
HOW MUCH MATERIAL YOU IT WILL BE REQUIRED (do not forget to consider paired and
symmetrical components).
DURING THE
GRINDING DOWN OF COMPONENTS FOCUS ATTENTION ON INCISIONS - THEY MUST COINCIDE!
CUT: From the proofing cloth: 1. The center section of the back - 2 components
2. The side member of the back - 2 components 3. The side member of the shelf -
2 components 4. The center section of the shelf - 2 components 5. [Podbort] - 2
components 6. Upper part of the sleeve - 2 components 7. Lower part of the
sleeve - 2 components 8. [Obtachka] of the neck of back - 1 component 9. Counter
- 2 components 10. Collar - 2 components 11. Backing of pocket - 2 components
From the backing cloth: 1. The center section of the back - 2 components 2. The
side member of the back - 2 components 3. The side member of the shelf - 2
components 4. The center section of the shelf - 2 components 5. Backing of
pocket - 2 components 6. Upper part of the sleeve - 2 components 7. Lower part
of the sleeve - 2 components FROM THE GLUE: [podbort], [obtachka] of the neck
of back, collar, counter, the side member of the shelf, the center section of
the shelf, the upper part of the center section of the back with the section of
armhole, the allowance of the bottom of the center section of the back, the
armhole of the side member of the back, the allowance of the bottom of the side
member of the back, the allowance of the bottom of the lower part of the
sleeve, the allowance of the bottom of the upper part of the sleeve.
DESCRIPTION OF THE WORK: 1. To double by the
glue padding of [podbort], to [obtachku] of the neck of back, collar, counter,
the side member of the shelf, the center section of the shelf, the upper part
of the center section of the back with the section of armhole, the allowance of
the bottom of the center section of the back, the armhole of the side member of
the back, the allowance of the bottom of the side member of the back, the
allowance of the bottom of the lower part of the sleeve, the allowance of the
bottom of the upper part of the sleeve. 2. To outline and to stitch tucks on
the center sections of the back and shelf. To [zautyuzhit] tucks on the back to
center, and on the shelf - upward. 3. To the face side of the center section of
the shelf on the incisions to put the sacking of pocket from the backing cloth,
on the side member of the shelf to put the sacking of pocket from the proofing
cloth by face side to downward and stitch. Seam to bend back and to
[nastrochit] to the sacking of pocket. 4. To stitch and to [razutyuzhit] relief
seams on the back. To stitch the average shear of back. To [zautyuzhit] seam to
the left side. To stitch relief seams on the shelf together with the sacking of
pocket. 5. To accumulate the components of collar by face sides to inward and
[obtachat] on the ends and the flying away. To carve, to turn inside out the
angles of collar. To stitch between themselves the components of counters,
packing between them collar beginning and concluding line are accurately in the
line of [vtachivaniya] steadfast. To turn inside out to the face side, to
[priutyuzhit] finished collar. To lay on the collar decoration line on 0.2 cm
from the edge. 6. [Podbort] to put on the face side of shelf by face side
downward, to [skolot] by pins and to [obtachat] along the line of board from
the bottom to the line of the middle of front. The lower of the edge of
[podbortov] to stitch to the center section of the shelf is strict along the
outlined line of the bending under of bottom. Seams of the upper and lower
angles of board to cut. Board to turn inside out to the face side, seams to
straighten. 7. To stitch the humeral and lateral shear of jacket. To
[razutyuzhit] humeral and side welds. 8. To stitch and to [razutyuzhit] the
humeral shear of [podborta] and [obtachki]. To stitch into the neck of jacket
lower collar, and upper collar into the neck of [podbortov] and [obtachki]. To
lay alongside decoration line on 0.2 cm from the edge. 9. To stitch and to
[razutyuzhit] the elbow seam of sleeve. 10. To stitch and to [razutyuzhit] the
front seam of sleeve. 11. To stitch sleeves into the armhole on the incisions.
To stitch [podplechniki]. 12. To stitch the components of backing, leaving
opening in by right sleeve. To [priutyuzhit] backing. 13. Backing to stitch to
the internal shear of [podbortov] and [obtachki] of the neck of back.
Allowances of the seams of [vtachivaniya] of collar to [razutyuzhit] and to
fasten closely to the seams. 14. To stitch backing to the bottom of jacket and
sleeve. To turn inside out the jacket through the opening in the sleeve. To
stitch opening in the sleeve. 15. To [nastrochit] the bottom of article and the
bottom of sleeve on 3 cm from the edge, without seizing backing. To [] shelf to
, stepping back 5 cm from the edge. 16. On the right shelf to sweep off loops,
while on the left shelf to sew buttons.